Industrial High Capacity Spray Dryer Price / Spray Dryer Machine / Spray Dryer

• Heating Mode: Transmission
• Material Status: Powder, Solution, Cream, Strap, Bulk
• Atomization: Pressure Atomization
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Flow: Contra-Flow
• Heat Source: Electricity, Steam, Coal Gas, Natural Gas, Fuel
• Type: Airflow Spray
• Inlet temperature: less than 50-350 Automatically controlled
• Outlet temperature: less than 60-100
• Drying form of centrifugal nozzle: Electric
• Revolution of atomizer (r.p.m): 22000
• Diameter of atomizing disc(mm): 50
• Dried powder recovery rate (%): more than 95%
• Transport Package: Fumigation-Free Wooden Case
• Specification: 1200*2000*2300mm
• Trademark: HENTO
• Origin: Henan, China
• Production Capacity: 5kg/H

Product Description

Industrial High Capacity Spray Dryer Price / Spray Dryer Machine / Spray Dryer

 

 

1.Production Description:
1, Working Principle
Air through the filter and heater,enter into the drying chamber at the top of the hot air distributor, hot air spiraling evenly into the drying chamber,liquid material through the filter,sent the top drying chamber of centrifugal spray head by pump.and it is sprayed into tinny fog droplets, with great surface area in contact with the hot air and the water evaporated quickly, within a very short time to dry grain products, in the bottom and the cyclone separator capture by wet exhaust fan to outside.
2.Feature And Usage
1)The spray dryer have fast drying speed, the material liquid by the centrifugal spray, to increase surface area, in the high temperature air, can evaporate 95-98% water by memont. it takes only a few seconds drying time.
2)It Suitable for heat-sensitive materials.Because the droplets and hot air flow and flow direction, although the hot air temperature is higher, but the material does not overheat during water evaporation.
3) Product has good dispersion, fluidity and solubility. because of the instantaneous drying, the product can maintain uniform fine granular
4) Production processing is simple, convenient operation and control.Special material for 40-60% moisture content (up to 90%) can dry powder products one time. Dried power don't need to crushing and screening, reduced the production process, improve the product purity.For the product particle size, bulk density, moisture, within a certain range, can change to adjust the operating conditions, control and management is very convenient.

2.Technical Parameter:

Model		HT-LXP5
Performance	Inlet Temperature	RT~300ºC
	Outlet Temperature	RT~120ºC
	Water Evaporation Capacity	6000ml/h
	Temperature control accuracy	±0.5ºC
	Dry Air Volume	200m³/h supercharged
	Atomizing motor	36000rpm Frequency Control
	Atomizer	SUS304 50mm
Configuration	Inlet air temperature adjustment	Temperature control digital display regulator
	Allocator	Multi-piece spiral hot air distributor + air inlet filter
	Air intake duct	Fully sealed, double-layer polygonal elbow + thermal insulation
	Temperature Sensor	PT100
	Heater	Back hanging 18kw
	Feeder	Peristaltic Pump BT100 MAX 15L/h
	Tower wall vibration mode	Air hammer
	Fan	2.2KW aluminum alloy, supercharged type
	AC contactor	Chint
	Observatory	Spiral fixed door
Specification	Drying room	Φ1000mm
	Machine Dimension	1850*1250*2150mm SUS304
	Weight	500kg
	Voltage	220/380V 50/60HZ(customizable)

Main fittings supply list                                           

No	Name	Quantity	Material	Remark
	Heating system
1	Air filter	1 set
2	Electric heating device	1 set	Stainless steel	18kw
3	Hot air duct	1 set	Stainless steel	89mm
	Atomization system and feeding system
1	Direct drive atomizer	1 set		0.4kw
2	Peristaltic pump	1 set
3	Conveying pipe	1 set	Silica gel
	Drying host system
1	Main tower	1 set	Stainless steel
2	Top cover	1 set	Stainless steel
3	Receiving bottle	1 piece	Stainless steel
4	Spiral hot air distributor	1 set
5	Air duct	1 set	Stainless steel	89mm
6	Volute cyclone	1 set	Stainless steel

We have several models of this machine. The following are the brief technical parameters of other models:

Paramters	HT-LXP
	5	50	50	150	200-2000
Inlet temperature °C	140~350 Automatically controlled
Outlet temperature °C	~80-90
Water evaporation capacity kg/h	5	50	50	150	200-2000
Drying form of centrifugal nozzle	Mechanism drive
Revolution of atomizer (r.p.m)	25000	18000	18000	15000	8000-15000
Diameter of atomizing disc(mm)	50	120	120	150	180-340
Heating source	Electricity	Electricity+Steam,Oil fuel,gas			Depends on the user
Max. power of electric heater (KW)	9	63	63	99
Overall dimension (m)	1.8×0.93×2.2	3×2.7×4.26	3.7×3.2×5.1	5.5×4.5×7	Depends on practical conditions
Dried powder recovery rate %	≥95	≥95	≥95	≥95	≥95

3.Product Picture:



4.Company Certificate:


5.Our Customer: