New Design 5L Mini Spray Dryer / Spray Dryer Machine / Spray Dryer For Milk Powder
1.Production Description:
1, Working Principle
Air through the filter and heater,enter into the drying chamber at the top of the hot air distributor, hot air spiraling evenly into the drying chamber,liquid material through the filter,sent the top drying chamber of centrifugal spray head by pump.and it is sprayed into tinny fog droplets, with great surface area in contact with the hot air and the water evaporated quickly, within a very short time to dry grain products, in the bottom and the cyclone separator capture by wet exhaust fan to outside.
2.Feature And Usage
1)The spray dryer have fast drying speed, the material liquid by the centrifugal spray, to increase surface area, in the high temperature air, can evaporate 95-98% water by memont. it takes only a few seconds drying time.
2)It Suitable for heat-sensitive materials.Because the droplets and hot air flow and flow direction, although the hot air temperature is higher, but the material does not overheat during water evaporation.
3) Product has good dispersion, fluidity and solubility. because of the instantaneous drying, the product can maintain uniform fine granular
4) Production processing is simple, convenient operation and control.Special material for 40-60% moisture content (up to 90%) can dry powder products one time. Dried power don't need to crushing and screening, reduced the production process, improve the product purity.For the product particle size, bulk density, moisture, within a certain range, can change to adjust the operating conditions, control and management is very convenient.
2.Technical Parameter:
Model |
HT-LXP5 |
Performance |
Inlet Temperature |
RT~300ºC |
|
Outlet Temperature |
RT~120ºC |
|
Water Evaporation Capacity |
6000ml/h |
|
Temperature control accuracy |
±0.5ºC |
|
Dry Air Volume |
200m³/h supercharged |
|
Atomizing motor |
36000rpm Frequency Control |
|
Atomizer |
SUS304 50mm |
Configuration |
Inlet air temperature adjustment |
Temperature control digital display regulator |
|
Allocator |
Multi-piece spiral hot air distributor + air inlet filter |
|
Air intake duct |
Fully sealed, double-layer polygonal elbow + thermal insulation |
|
Temperature Sensor |
PT100 |
|
Heater |
Back hanging 18kw |
|
Feeder |
Peristaltic Pump BT100 MAX 15L/h |
|
Tower wall vibration mode |
Air hammer |
|
Fan |
2.2KW aluminum alloy, supercharged type |
|
AC contactor |
Chint |
|
Observatory |
Spiral fixed door |
Specification |
Drying room |
Φ1000mm |
|
Machine Dimension |
1850*1250*2150mm SUS304 |
|
Weight |
500kg |
|
Voltage |
220/380V 50/60HZ(customizable) |
Main fittings supply list
No |
Name |
Quantity |
Material |
Remark |
|
Heating system |
1 |
Air filter |
1 set |
|
|
2 |
Electric heating device |
1 set |
Stainless steel |
18kw |
3 |
Hot air duct |
1 set |
Stainless steel |
89mm |
|
Atomization system and feeding system |
1 |
Direct drive atomizer |
1 set |
|
0.4kw |
2 |
Peristaltic pump |
1 set |
|
|
3 |
Conveying pipe |
1 set |
Silica gel |
|
|
Drying host system |
1 |
Main tower |
1 set |
Stainless steel |
|
2 |
Top cover |
1 set |
Stainless steel |
|
3 |
Receiving bottle |
1 piece |
Stainless steel |
|
4 |
Spiral hot air distributor |
1 set |
|
|
5 |
Air duct |
1 set |
Stainless steel |
89mm |
6 |
Volute cyclone |
1 set |
Stainless steel |
|
We have several models of this machine. The following are the brief technical parameters of other models:
Paramters |
HT-LXP |
5 |
50 |
50 |
150 |
200-2000 |
Inlet temperature °C |
140~350 Automatically controlled |
Outlet temperature °C |
~80-90 |
Water evaporation capacity kg/h |
5 |
50 |
50 |
150 |
200-2000 |
Drying form of centrifugal nozzle |
Mechanism drive |
Revolution of atomizer (r.p.m) |
25000 |
18000 |
18000 |
15000 |
8000-15000 |
Diameter of atomizing disc(mm) |
50 |
120 |
120 |
150 |
180-340 |
Heating source |
Electricity |
Electricity+Steam,Oil fuel,gas |
Depends on the user |
Max. power of electric heater (KW) |
9 |
63 |
63 |
99 |
|
Overall dimension (m) |
1.8×0.93×2.2 |
3×2.7×4.26 |
3.7×3.2×5.1 |
5.5×4.5×7 |
Depends on practical conditions |
Dried powder recovery rate % |
≥95 |
≥95 |
≥95 |
≥95 |
≥95 |
3.Product Picture:
4.Company Certificate:
5.Our Customer: