Can be customized Spray Dyer Line

• Heating Mode: Transmission
• Material Status: Powder, Solution, Cream, Strap, Bulk
• Atomization: Pressure Atomization
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HT-RY1500
• Flow: Parallel Flow
• Heat Source: Electricity, Steam, Coal Gas, Natural Gas, Fuel
• Type: Airflow Spray
• Inlet Temperature: 30 ºC ~400ºC
• Outlet Temperature: 30 ºC ~200ºC
• Water Evaporation Capacity: 1500mL/H ~ 2000ml/h
• Max Inlet Amount: 2000ml/h
• Min Inlet Amount: 50mL
• Temperature control accuracy: ±0.5ºC
• Average drying time: 0.8~1.0S
• Transport Package: Fumigation-Free Wooden Case
• Specification: 600*800*1400mm
• Trademark: HENTO
• Origin: Henan, China
• Production Capacity: 2L

Product Description

Can be customized Spray Dyer Line

 

1. Machine introduction  Mainly applicable to colleges and universities, research institutes and food and pharmaceutical industry laboratory production of trace particles of powder, for  all solutions such as emulsions, suspensions with broad-spectrum applicability, suitable for heat-sensitive substances such as biological products, biological pesticides , Enzyme preparations, etc., because the material is only sprayed  into the mist when the size of particles by the high temperature, it is only instantaneous heat, to keep these active materials in the dry after the maintenance of its active ingredients are not destroyed.

The whole machine is made of 304 stainless steel and the nozzle is made of 316 stainless steel.

2. Machine features

1.Original imported nozzle, high efficiency.

  2.Color LCD touch screen parameters display: air inlet temperature / outlet temperature / peristaltic pump speed / air volume / pass needle frequency.

  3.With a nozzle cleaner (through the needle), when the nozzle is blocked, it will automatically clear the frequency of the needle can be automatically adjusted.

  4.Shutdown protection function: only need to stop when the shutdown button, the machine in addition to the fan immediately stop running, to ensure that the device will not be due to misuse (forced off the wind turbine) caused by heating part of the burn.

  5.The spray, drying and collection system is made of a transparent, high-quality, high-borosilicate heat-resistant glass material to allow the drying process to proceed in a non-polluting environment.

 6.Two fluid spray atomization structure, compact design, no ancillary equipment. The same time as the above-

  7.dry temperature control design using real-time control PID temperature control technology, so that the whole temperature zone temperature control accuracy, heating temperature control accuracy ± 1 ºC.

8.In order to keep the sample pure, equipped with air inlet filter.

   9.The amount of feed can be adjusted by feed peristaltic pump, the minimum sample volume up to 30ml.

  10.dry finished powder, the particle size is more uniform, more than 95% of the dry powder in the same particle size range.

  11.For the sticky material, with a nozzle cleaner (through the needle), when the nozzle is blocked, it will automatically clear the frequency of the needle can be automatically adjusted.

3. Technical parameters&Quotation

Model	HT-RY1500
Inlet Temperature	30 ºC ~400ºC
Outlet Temperature	30 ºC ~200ºC
Water Evaporation Capacity	1500mL/H ~ 2000ml/h
Max Inlet Amount	2000ml/h
Min Inlet Amount	50mL
Temperature control accuracy	±0.5ºC
Average drying time	0.8~1.0S
Power	3.8KW /220V(can be customed)
Dimension	600*800*1400mm
Material	Carbon steel casing	All Stainless steel

 

4.Fittings
Dry machine	1/set
Air compressor	1/set
Glass drying room	1/set

Glass cyclone separator	1/piece
Glass sample collection bottle 500ML	1/piece
Glass samples collect cold traps	1/piece
Medical grade feeding tube	1.5m
Spray pistol	1/piece
Clamp	1/set
PTFE gasket	1/piece

 

 

3.Product Picture:






4.Company Certificate:


5.Our Customs